INFO CENTER

Every time a customer comes into contact with a product, the brand can be promoted. When the customer sees the product on the shelf, buys it, unpacks it, uses it, uses it a second time, and gives the product or packaging as a gift to someone else ...... the product becomes the most frequent point of contact between the brand and the customer.

Protect the goods from the invasion and impact of external obstacles, such as the impact, vibration, heavy pressure in the process of storage and transportation, as well as high temperature and high humidity or contact with chemical substances and produce deterioration, deformation, or because of the complete loss of commodity use value.

PETG heat shrinkable film has the highest shrinkage rate among all shrinkable films, and its application range is much higher than that of other shrinkable films. The made shrink label has the best shrink effect that any commercial shrink film can't match, and can fit tightly and be highly contoured. The shrinkage rate of up to 80% is realized through customized configuration so that it can fit on special-shaped containers, polygonal containers and circular containers without defects after shrinkage, and even small parts such as bottleneck can be tightly wrapped. Once fitted, its superior strength and toughness can prevent the risk of bottle explosion. The strong shrinkage force can prevent the label from falling off, and keep the shrinkage rate unchanged throughout the product life cycle, so as to avoid damaging the best packaging appearance. It allows your product to shrink to a perfect fit and fit impeccable.

Heat shrink polyester film in addition to being used for shrinkable labels, in recent years also began to be used in the outer packaging of daily goods. Since it can not only protect the packaging goods to avoid impact, rain, moisture, rust, but also make the product with exquisite printing packaging to win users, at the same time, it can well show the excellent image of the manufacturer. At present, more and more packaging manufacturers use printed shrink film to replace the traditional transparent film. Because printing shrinkage film can improve the appearance of the product grade, is conducive to product advertising, can make the trademark brand in the hearts of consumers have a deep impression.

The germination of packaging design can be traced back to the primitive era when people used shells, bamboo tubes, gourds, banana leaves, animal skins and other containers as packaging to store food; In modern times, packaging design is no longer just a simple function. The role of practicality and protection of commodities, commodity packaging is usually associated with commodities and has become an important factor in determining the attributes and value of commodities.

FDA is authorized by the U.S. Congress, which is the highest law enforcement agency specializing in food and drug management.

The number of composite material, thickness, viscose type (except co-extrusion) is an important factor affecting the price of composite bags. Retort Packaging aluminum foil composite bags, for example, its various materials to high temperature resistance, viscose to high temperature, so it is more expensive than ordinary aluminum foil composite bags.

In the "anti-plastic" wind prevailing today, the kraft paper bag is favored by more and more industries and enterprises, began to use it to replace plastic bags, shopping bags and so on for packaging products, this is because the kraft paper bag has general soft plastic packaging bags do not have the advantage.

Retort pouch is a kind of composite plastic film bag that can be heated. It has the advantages of both canned containers and boiling water resistant plastic bags. Food can be left untouched in the pouch, after high temperature (generally 120~135℃) sterilization heating, take out can be eaten. Retort pouch is widely used, different specifications of the packaging bag for the selection of base material and raw materials are different. 

A membranous metal paper coated or affixed with a film resembling silver, usually silvery white, actually aluminum foil. Aluminum foil, made of Aluminium foil with a thickness of less than 0.2mm, is mainly used in kitchens to cook, hold food and make materials that can be easily cleaned. Thousands of tons of aluminum foil are applied around the world to protect and wrap food, cosmetics and chemicals.

Skin packaging originated in developed countries in Europe and America. It is a novel packaging technology and a future development trend. Technically speaking, unlike vacuum shrink packaging and modified atmosphere packaging, skin packaging is to heat a transparent plastic film to soften it, and then cover it on the cut beef lined with a box, and vacuum from below. The plastic film softened by heating adheres to the surface of the beef according to the shape of the beef, and at the same time adheres to the tray that carries the beef. After cooling and forming, it becomes a novel packaging object

Easy tear sealing film is a kind of easy tear film, and it is also a relatively sealing packaging product at present. Easy tear sealing film, does not mean that the packaging itself is easy to tear, but attached to the packaging product is easy to be opened for use without consuming great effort or even damaging the package.

The acceptance of goods is very important for every manufacturer.  Only strict control can truly purchase high-quality raw materials, which is the same for food manufacturers. Especially for packaging food packaging bags, its acceptance process is also very important.

Protecting the appearance quality of food produces certain economic benefits

First of all, let's know about the raw materials used in the production of high and low pressure plastic bags: PE (polyethene), plastic bag, plastic wrap, etc. are all made by PE. There are three main types of PE commonly used to make plastic bags: HDPE, LDPE and LLDPE.